LFT-G venta caliente PEEK fábrica propia buen precio Compuestos largos de fibra de carbono muestra de plástico reforzado disponible

OJEADA

PEEK, comúnmente conocido como poliéter éter cetona, es parte de la familia de poliéter cetona de termoplásticos semicristalinos. Sin embargo, la proporción única de éter (E) a cetona (K) de 2:1 de los polímeros PEEK proporciona una resistencia química superior en comparación con otras polietercetonas y es un factor importante en el uso más amplio de PEEK, que no solo está disponible como resina pura, pero también se puede modificar mediante la adición de relleno de fibra de carbono. Sus propiedades

PEEK-LCF

PEEK-LCF30 % con un 30 % de relleno de fibra de carbono larga ha sido nuestro pilar, y el PEEK LCF30 % de LFT-G está formulado con un 30 % de refuerzo de fibra de carbono larga para lograr la mayor resistencia mecánica y rigidez de cualquier grado de PEEK. Y PEEK LCF30% no se ve afectado por ciclos de autoclave repetidos y es resistente a una amplia gama de productos químicos.

It also meets FDA requirements for direct food contact applications and meets the aerospace industry's stringent flammability and low smoke requirements with a flame retardancy rating of UL 94 V-0. It has the wear and temperature resistance of PEEK and can withstand long-term exposure to steam, hot water and a wide range of chemicals. In particular, it performs well as a bearing material when operating on hard mating surfaces, and its materials are often used in precision machined parts. It has the highest strength and stiffness of any PEEK grade. Although it contains more reinforcement per unit volume, it is 7% lighter than glass-reinforced grades. It is an excellent choice for high-load machined or molded parts.

TDS for your reference

Appilcation

Details

Reasons for selection

The above general-purpose grade PEEK-LCF is LFT-G's main product, LFT-G can also provide more custom modification services, we have also been committed to custom R & D production of special engineering plastics PEEK, PPS, PP, PA6, PA66, PA12, TPU, ABS, etc.

01
Factory direct sales, with high-tech factory
Affordable price and high quality products.

02
Large amount of inventory, hundred tons of stock
Adequate stock, quality and quantity assurance, on-time delivery, the company has its own warehouse, a full range of products.

03
Provide perfect supporting services for customers
Zhenghao has a perfect pre-sales, sales and after-sales service system; the first time to solve the customer's concerns.

Frequently asked questions

Q. When using long carbon fiber engineering plastics, what is the solution to the lack of torque an insufficient injection pressure?

A. You can change the injection molding machine to a larger size, or increase the molding temperature, increase the injection pressure.

Q. The cost of long fiber products is higher. Does it has a high recycling value?

A. The thermoplastic LFT long fiber material can be recycled and reused very well.

Q. Using a long fiber reinforced thermoplastic material, will it block the die hole due to the long length of the fiber or not?

A. When using long glass fiber or long carbon fiber, it is necessary to evaluate whether the product is suitable for LFT-G. If the product is too small or the dispensing is not suitable for long fiber materials. The long fiber itself has requirements for the mold nozzle.