LFT information

LFT sheet is a new generation of thermoplastic composite material after GMT (glass fiber felt reinforced thermoplastic) sheet. It is composed of long fiber as reinforcement material and polypropylene (PP), PA, PET as matrix material.

In the automobile industry and many fields, there is an urgent need for weight, environmental protection, recyclable, good impact toughness, etc., the above characteristics of LFT sheet is a new composite material which is very forward-looking in line with the global and Chinese development needs.

LFT sheet using method and pressing process:

1, using the volume calculation method or density conversion method between different materials to calculate the product sheet dosage.

2. Cut the LFT sheet into a size roughly the same as the product area and weigh the additional sheet.

3. Preheat it at 220℃ for 8-12 minutes to make it soft.

4, take out, immediately put into the mold of the press, and quickly close the mold (mold temperature at about 90℃).

5. It can be removed 1-3 minutes after mold closing.

6, remove a small number of burrs, flying thorns, the product is ready.

Principales áreas de aplicación de la lámina LFT:

1, autopartes: viga de parachoques, esqueleto del asiento, parte delantera, esqueleto del panel de instrumentos, soporte de la batería, cubierta del motor, tablero de pedales, placa interior de la puerta, placa de protección, soporte del equipaje, marco del neumático de repuesto y otros 40 tipos

2, plantilla de construcción: plantilla fundida en el lugar, plantilla prefabricada

3. Caja de embalaje: placa inferior y placa lateral del contenedor

4. Estadios y equipamiento deportivo: asientos, esquís, etc.

5, equipamiento químico: componentes de torre anticorrosión, filtro, componentes del reactor, etc.

6, electrodomésticos: cubierta de la máquina de aire acondicionado al aire libre, rejilla de cable, marco, etc.